Re: Mini 250R

by **Mark Barnes** 2014-10-02, 22:47

Maidened my 250 tonight. Intresting to say the least. First flight broke 3 props. Second flight broke 1 next flight went loads better.

Finished off with 2 full packs through it and getting it tuned in.

Early errors were down to gains well to high. I will post my flyable settings up in the morn but anyone with one do not fly on the base kk settings it will try and kill it sself

by **Andy Sayle** 2014-10-02, 23:16

I'm amazed how different yours flew on the stock settings, to mine. Mine was flyable, but not right. Yours wanted to kill itself. Mad.

I'd recommend turning the I gains to 0 for pitch roll and yaw, and lowering the post gains to about 25 for the first flight. That should be flyable, but not an instant crash

by **Rich** 2014-10-03, 07:40

How's about I keep mine as a spare for you two

by **Andy Sayle** 2014-10-03, 08:24

Ha ha, get it built Rich!

Oh and if anyone is using the little landing leg things that push into the holes on the end of the arm, use some glue to hold them in place. I had one fall out last night....

Andy

by **Mark Barnes** 2014-10-03, 09:00

My flyable gains are (Thanks Andy for your help)

ALI

Pgain-25
Plimit- 40
Igain-15
Ilimit- 20

ELE

Pgain-25
Plimit- 40
Igain-15
Ilimit- 20

RUDDER

Pgain-20
Plimit- 20
Igain-10
Ilimit- 10

by Guest 2014-10-03, 14:44

your setting are a lot lower than ours wonder why yours is so twitchy on the higher settings
also just found these vids Laughing

if you havent seen them already think your gona want one Mark https://www.youtube.com/watch?feature=player_embedded&v=EbavHsTsXPQ&list=UUlHqKLdsogWToHIjybzzN3w

by Guest 2014-10-03, 14:53

Just a thought but what's your KK2 flashed with ? Question

by **Mark Barnes** 2014-10-03, 15:24

Im running stock firmware not sure the number.

Im watching the 3d quad market closly but wont be buying one untill the prices become more realisic

by **Rich** 2014-10-03, 15:30

they will never get that low, I'll get one if you want

by **Andy Sayle** 2014-10-03, 15:32

I would have expected you to get two Rich!

by **Rich** 2014-10-03, 18:39

no for Mark I meant

by Guest 2014-10-03, 20:09

these are ok
Steveis 1.19S1 firmware
Kapteinkuk 1.16
we are both running the Kuk 1.16 but are going to try the 1.19s1 soon

by **Mark Barnes** 2014-10-03, 21:09

Someone should Rich.

by Guest 2014-10-03, 21:12

stuff Mark get me one Shocked

by **Rich** 2014-10-03, 22:23

Gary wrote:these are ok
Steveis 1.19S1 firmware
Kapteinkuk 1.16
we are both running the Kuk 1.16 but are going to try the 1.19s1 soon

what sort of info. is that where's the link

by Guest 2014-10-04, 10:33

they are on the kkmulticopterflashtool_0.80beta2 Rich Shocked

http://lazyzero.de/en/modellbau/kkmulticopterflashtool#kkmulticopter_flashtool

by **Mark Barnes** 2014-10-04, 20:06

Took mine out for some pre race testing, man its quick

by **Rich** 2014-10-04, 23:23

you didn't call landing, looks good

by **Mark Barnes** 2014-10-05, 12:12

Haha. Had no warning of lipo expiry so landing came as a suprise

by **Rich** 2014-10-06, 12:08

the little barstewards are ballistic, if i get into open space it will last about 10 secs max

by Guest 2014-10-06, 12:12

there ok after a few flights and if you dont let them get to far away Laughing

by **Rich** 2014-10-06, 12:14

come and fly mine for me then

by Guest 2014-10-06, 12:17

if i can fly um your not gona have any problems :-)

by **Rich** 2014-10-06, 12:19

post you version number and PI settings in the trim thread

by Guest 2014-10-06, 12:21

will do but from what iv seen they all seem to be different by a long way :-/

by Sponsored content