Hammer

Mine will have

Savox 0257 in the wings amd 81mg's in the fus

M

Sweet

No Marty, you can't have one

Tim wrote:No Marty, you can't have one

Tim you're right, no point, you would only smash it for me! pmsl
Tis nice though!

Hopefully buddy

M

I bet it will go like greased weasel you know what!

greased weasel you know what!

Hammer??

Well ........ yeah! what else?

I've just been re-reading the description on this one again, and it's quite amusing:

"All prepared for impregnation"

Well, I like a good glider with an electric nose as much as the next person, but impregnating it? Hmmmm......

That's quite disturbing ...

Just ordered mine - also T tail version
Im using 0257s all round and probably 2s lipo power with small reg.
Seems like a nice alternative to those oh so common Lunas
Pity Rob doesnt stock the required servos etc:-(
Rob....I take it you will pick up on the order notes ( "T" tail )

Damm site cheeper than the Luna too

Thats 3 in RDMFC so far then, and there was me thinking I would be different lol

Should be interesting to compare them all

M

whose number 2 then Marky?

Not for me to share im afraid, just in case there dodging the tax man lol, Lets just say I would have still been different, with there record of finishing gliders

M

Im wondering now if I should have gone V tail ?
For: ready hinged and assembled. less drag. less landing damage potential
Against: Rudder usually less powerful. Can be fiddly to connect up.
DECISIONS!

The V tail version looks very similar to my 15 yr old Tomahawk. Carbon wing, gf fus etc etc. Funnily enough it has 057s in the wing after a recent change. Still on 35 MHz so will have to update it for the Orme

Thanks for your order Tim
T tail ? or classic ?

I'll have servos as well - but not at the moment and it will take some time as I'm focusing on a something else money wise investing
But I'll keep you updated on that if you wish.

Many thanks - I'm sure you/we will enjoy flying Hammers - Blejzyk is one of the best glider producer (in Poland) and doesn't cut corners.
PS. I've promised Mark I'll pop in to Orme for a maiden - so see you there on Hammer convention

Just found the deets for the Tomahawk for those interested in antique planes!... Made by a short lived company, in the midlands somewhere iirc, called SlopeNutters...
Came as an artf - i.e.a kit! First flight March 1996. RG15 airfoil, Carbon wing, Balsa tailplane but I glassed them. GF fuselage with 1/4" ply spine for extra strength (Not that it needs it)
Gone through several sets of aileron servos and, as mentioned, 057s now fitted. Elevator is the original (might not be original) Hitec HS-300, Rx is Futaba FP-R107N on 35 MHz
Battery pack is the original 5 cell AA NiCd pack. Original capacity was 600 mAh, now 400 mAh so I'll probably replace. Current capacity tested a few months ago at 10 amps. Gone through several rx switches
Whole model is very robust and goes very well. Lots of accrued damaged to wingtips and LE of wing and tailplane... But nothing serious. Total flying hours must be in the many hundreds

Look forward to seeing that Alan.

M

Robert Piechulski wrote:Thanks for your order Tim
T tail ? or classic ?

I'll have servos as well - but not at the moment and it will take some time as I'm focusing on a something else money wise investing
But I'll keep you updated on that if you wish.

Many thanks - I'm sure you/we will enjoy flying Hammers - Blejzyk is one of the best glider producer (in Poland) and doesn't cut corners.
PS. I've promised Mark I'll pop in to Orme for a maiden - so see you there on Hammer convention

Hi Rob. Is the "T" tail version ready hinged etc, as I see the V tail ( classic? ) is.

Hi Tim - just to make sure - available versions are V and classic (inverted T)
"normal T" is not available for the Hammer -( I believe you could do it yourself anyway)
I sell the high version only of Hammer and future models.
Hinges are installed, all is sanded, shaped, servo holes are cut dihedral (depends of the model) is prepared.
He will send me some more pictures later - at the moment they work 7 days a week and he simply hasn't got the time (he has many pictures - but mostly with some other people who may not be happy to go public )
I will have 1 extra set of V tail - so can send you both - classic and V - and you can send me back the one you like less - if that's any good for you .

That sounds like a great idea Rob - send 'em both, and Ill return one
I have already ordered the servos mate - sorry, but impatient is my middle name
look forward to seeing you up the Orme sometime soon

Great
I doubt I'll have servos in sale before I buy for myself LOL - you better tell where did you get them from
Orme - CAN'T WAIT