Home
Gallery
Register
Log inLog in
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ 
.
Farmer …
. Farmer …
Comments: 1
Hammer
+6
Rich
melfyn
Tim
Roy
Marty
Mark Barnes
10 posters
Page 7 of 7
Page 7 of 7 • 
1, 2, 3, 4, 5, 6, 7
Re: Hammer
by Andy Sayle 2012-08-07, 10:37
Nice. Is that a sheet of lead in the fuselage, above the battery? What motor/ESC/pack/Prop is being used, and what are the power readings?
Andy
Andy
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Hammer
by Guest 2012-08-07, 11:10
Motor Emax 2810/12 1100Kv
Lipo Overlander 2200 3S
ESC Plush 60A
Prop 10x6 (11x6 and 10x7 on standby)
No idea of power readings and I'm not sure if he has gear to read it, but apparently pull is up in static test - maiden will be today if weather permits.
Not sure about the lump of metal above the battery - but he will call me tonight so I will ask him
Lipo Overlander 2200 3S
ESC Plush 60A
Prop 10x6 (11x6 and 10x7 on standby)
No idea of power readings and I'm not sure if he has gear to read it, but apparently pull is up in static test - maiden will be today if weather permits.
Not sure about the lump of metal above the battery - but he will call me tonight so I will ask him
Guest- Guest
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Hammer
by Guest 2012-08-07, 11:20
No problem Andy
I nag him about some video, if he does it and you don't mind my spamming here I will leave a link.
PS. this is his first glider ever as he flies rather 3D stuff - so should be interesting to see how he copes
I nag him about some video, if he does it and you don't mind my spamming here I will leave a link.
PS. this is his first glider ever as he flies rather 3D stuff - so should be interesting to see how he copes
Guest- Guest
Re: Hammer
by Andy Sayle 2012-08-07, 11:24
It's not spamming. Spamming would be something no-one is interested in, like cheese rolling. Although, I'm actually quite interested in cheese rolling....
Andy
Andy
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Hammer
by Guest 2012-08-07, 14:54
OMG Andy there might be kid reading this 
dont think its right that you go on about rolling your cheese 
dont think its right that you go on about rolling your cheese
Guest- Guest
Re: Hammer
by Andy Sayle 2012-08-08, 22:32
Tell whoever flies that model to set the brake up properly on the escape, so the prop folds properly! Looks good though,:-)
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Hammer
by Guest 2012-08-08, 22:41
Esc brake is sorted now, he didn't have the card.
He had a few flights, this one was the last one, after "landing" one of the wing bolts had snapped.
Didn't think to be honest that Hamm will fly like that - it may not be the competition glider but it is certainly great all-rounder - I think that I have no other choice now that to fit a motor in mine ...
He had a few flights, this one was the last one, after "landing" one of the wing bolts had snapped.
Didn't think to be honest that Hamm will fly like that - it may not be the competition glider but it is certainly great all-rounder - I think that I have no other choice now that to fit a motor in mine ...
Guest- Guest
Page 7 of 7 • 1, 2, 3, 4, 5, 6, 7
Page 7 of 7
Permissions in this forum:
You cannot reply to topics in this forum
» Need help on how to just directly power my Detrum RXC6 6CH 2.4Ghz Receiver?
» 2019 Llanfair TH Village Fete
» Police crash
» Bit of indoors