Log in
Similar topics
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ
.
Farmer …

Farmer …
Comments: 1
Club Night - Thursday 3rd June.
+2
Brian Colclough
Andy Sayle
6 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: Club Night - Thursday 3rd June.
I had a bet with myself, that it would be no more than five posts before someone suggested an AA logo!
I haven't used auto-air before, no. I've been reading up on the datasheets, and usage guidelines though. It looks to be pretty straightforward, just slightly longer curing times between layers, compared to the (rubbish) solvent based stuff I have been using.
Andy
I haven't used auto-air before, no. I've been reading up on the datasheets, and usage guidelines though. It looks to be pretty straightforward, just slightly longer curing times between layers, compared to the (rubbish) solvent based stuff I have been using.
Andy
_________________
Chicks dig slop free linkages....
Andy Sayle- Club Chairman
- Posts : 4739
RDMFC Bonus points : -487569787
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Club Night - Thursday 3rd June.
Those still shots are pretty darn good.
_________________
Experience often wins.
Tim- Committee Member
- Posts : 2968
RDMFC Bonus points : 3235
Join date : 2008-11-18
Location : Tim Mackey lives in Deganwy
Re: Club Night - Thursday 3rd June.
There are a lot of people who don't like Auto Air! it takes a bit of getting used to and can be prone to tip dry, the drying / curing time is real fast! just hit it with a hot air gun. (it took me a couple of courses to get comfortable with it).Andy Sayle wrote:I had a bet with myself, that it would be no more than five posts before someone suggested an AA logo!
I haven't used auto-air before, no. I've been reading up on the datasheets, and usage guidelines though. It looks to be pretty straightforward, just slightly longer curing times between layers, compared to the (rubbish) solvent based stuff I have been using.
Andy
Re: Club Night - Thursday 3rd June.
there taken from the video me thinks
_________________
The best pilots are the ones that practice most!
http://www.futaba-rc.com/systems/18mz.html
Re: Club Night - Thursday 3rd June.
Nice shots Andy, Id happiley pay 50p for one of them!
_________________
2 Time Electric Indoor Masters Freestyle Champion, Seems an awful long time ago now.
Mark Barnes- Club Secretary
- Posts : 6608
RDMFC Bonus points : 8241
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Club Night - Thursday 3rd June.
someone has tried to defraud the club of funds relating to the BBQ, supprised it's taken this long to comment
_________________
The best pilots are the ones that practice most!
http://www.futaba-rc.com/systems/18mz.html
Re: Club Night - Thursday 3rd June.
Yep, still shots taken from the video (which is pretty good considering!) I'll have to see about uploading some sections of it to youtube when I get a few moments over the weekend.
Defraud, club? me?!
Andy
Defraud, club? me?!

Andy
_________________
Chicks dig slop free linkages....
Andy Sayle- Club Chairman
- Posts : 4739
RDMFC Bonus points : -487569787
Join date : 2008-11-16
Location : Abergele, North Wales
Page 2 of 2 • 1, 2
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|
» Proposals for Model aircraft flying ( CAA registration) April 2019
» Police crash
» Bit of indoors
» For Sale