Saturday 6th June

Well the good weather has gone , so whats everone upto today, Ive got some running round to do then into the workshop for some tinkering

M

gosh you've got an exciting life wait untill you are retired only nearly 40 years to go

Just filled out a claim for Jobseekers allowance I've had closure on the whole work debacle, and as you can imagine, it's less than ideal

Then, it's onwards with the current build (a wickedly fast hotliner to be revealed before Weston Park hopefully!), a bit of rowing, and a bit of designwork on a couple of other projects too.

G.P. Qualifying and tinkering with club website

Bit of shopping and maybe a run out to the model shop in Greenfield. Then in to the workshop to spend some time on the net sourcing bits for a digital pitch gauge!

The Newsletter has the Scale and Electric day down as September 13th by the way.


DaveS

Pesky newsletter If it was all online, I could have edited it, and said you are losing your marbles by imagining incorrect dates

The Newsletter is wrong by the way. The correct dates are here: https://rdmfc.forumotion.co.uk/club-matters-f13/events-list-for-2009-t312.htm

I'm going to see about putting that topic as a Sticky in the relevant sections

Cheers
Andy

Andy sorry to hear about your job. Whats a sticky?

Unfortunately its not a bun - a sticky is a thread which stays at the top of the pile all the time to increase its exposure to users.

What's a sticky what???

I'm confused now Doesn't take much mind!

No worries about the Job. I've got an interview lined up on Monday morning

andy

Such a thrilling day . Did the breakfast washing up , picked up the dog poo in the garden (got very wet) and now I'm puting on new plastic chains at the bottom of the verticle blinds in the lounge - the smallest yorkie thought they looked good to eat . Phew, the excitement, must sit down and get my breath back. Need to focus for further highs to come later in the day.

Oh, and Dave, you want to get yourself one of these bad-boys:

http://www.machine-dro.co.uk/index.php?target=products&product_id=7

I've got one, and it is brilliant for measruing all sorts of angles. It has a magnetic base so it can be made to stick to all sorts of jigs and fixtures, and is accurate down to about 0.1°

If you buy one from the Machine-DRO website, tell them I sent you!

Cheers
Andy