Log in
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ
.
Farmer …

Farmer …
Comments: 1
Flying wing plans
RDMFC :: Classifieds
Page 1 of 1
Flying wing plans
Anyone got or know of any decent flying wing plans?
Thinking of trying to make something similar to a powered zagi but bit bigger!
Haven't balsa built for a while so getting the urge to break out my posh pins and pva glue!
Cheers for the input!
Ben......
Thinking of trying to make something similar to a powered zagi but bit bigger!
Haven't balsa built for a while so getting the urge to break out my posh pins and pva glue!
Cheers for the input!
Ben......
Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
Re: Flying wing plans
Sliced and Dried tree bashing eh?
Probably not to the size you are after, but this is quite nice:
http://pierre.rondel.free.fr/images2/lalysee/Lalysee.htm
You could perhaps scale it up? In fact, the DXFs for the parts are posted on that site, so you could even save the hassle of cutting parts yourself, and get Rich to blast them out on his fricking laser
Micron also have some plans, again they seem to be for the smaller end of things though. Again, they could be scaled up
http://www.micronradiocontrol.co.uk/flp_plans_wing.html#flp-frazzle
Andy
Probably not to the size you are after, but this is quite nice:
http://pierre.rondel.free.fr/images2/lalysee/Lalysee.htm
You could perhaps scale it up? In fact, the DXFs for the parts are posted on that site, so you could even save the hassle of cutting parts yourself, and get Rich to blast them out on his fricking laser

Micron also have some plans, again they seem to be for the smaller end of things though. Again, they could be scaled up

http://www.micronradiocontrol.co.uk/flp_plans_wing.html#flp-frazzle
Andy
_________________
Chicks dig slop free linkages....
Andy Sayle- Club Chairman
- Posts : 4739
RDMFC Bonus points : -487569787
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Flying wing plans
If you want IC I've got the plans and instructions from a 'RAPIER' kit you could get copied. About 4' span for a 0.45 - 0.52 (+ a pipe would be good). I think there was an electric conversion in the mags some time back(something lik 4 cells and 50+A). If you zoom in, ignoring Lee's builders cleavage, on the 'trouser launch' photo on Boggles album you'll get some idea of the looks
Guest- Guest
Re: Flying wing plans
Cheers for the help fella's, loads to choose from!
I actually really like the look of that little lalysee glider aswell Andy - might have to get two projects on the go and clog up the kitchen table with "my crap" as well as the shed!
I actually really like the look of that little lalysee glider aswell Andy - might have to get two projects on the go and clog up the kitchen table with "my crap" as well as the shed!

Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
RDMFC :: Classifieds
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
» Proposals for Model aircraft flying ( CAA registration) April 2019
» Police crash
» Bit of indoors
» For Sale