Wanted

Wanted 32x10 prop, preferably carbon

Couple of burnt wooden 16*10 any good

32x10!??!?!?!!
Thats BIG!!!!

Brian Colclough wrote:Wanted 32x10 prop, preferably carbon

most 150's run 30 x 12

I've found some info on this now no longer produced 140 and the recommended 2 bladers are 28x12 30x10 30x12 or 32x12. If the handshakes done I'll try it with what's on there first I reckon the 30x10 could be the puppy

http://www.bmfaclassifieds.co.uk/detail.php?id=31478

Cheers on that Mark but after talking this over with Nath and Rich I think something around 29 to 30" diameter is going to be what I'm after, thanks for the shout though Should be picking the Ultimate up tonight

OoooooooOOOOOOOooooooOOOOOOoooooooo
Post up some pics if you can!

I will indeed Sam Talking of the prop again I think the one on there which Nath said is going sonic both on the ground and in the air but is loading the motor too much on verticals is 32" diameter. With props of this diameter if turning around 6000rpm the tip speed critically gets above sonic so I'm guessing a smaller prop may suit, fingers crossed. I think Rich has a 29" for me to try.

Here's a couple of pictures of the Ultimate in the trailer can't get it out at the moment as it's doing cats and dogs. Hope the weather clears up so I can get my receiver in ready to fly it

Ooohhhh nice scheem to it!
will it be ready for a maiden by thursday?

Maybe Sam if I can get it up and running by then but definitely won't fly it till I'm 100% happy with everything.

Yep, why rush?

Very nice

You could always cut the prop tips back a bit, it's worked great on that Biela prop I bought at Weston

Andy

Andy Im coming to the club night, hopefully mark will be their to!

wooohooo!

I'll stock the van up with magazines for you then SWMBO will be pleased to have some more space in the house!

Andy

Diolch yn fawr Iawn am nhw, Rydw I yn edrych ym lean I ddarllen nhw!
Diolch yn Fawr Iawn.

Andy Sayle wrote:Very nice

You could always cut the prop tips back a bit, it's worked great on that Biela prop I bought at Weston

Andy

I could indeed clip the prop down Andy but Rich has a Biela for me to try on it first

Indeed. Trimming props is always good when you want an odd size. After reading and listening to many opinions on the best prop for a DL55, Roughly 90% said 23x8, and 10% said 22x10. I came to the conclusion that the best size was an average of the opinions, so I have gone for a 22.9x8....

I've just realised the eyes of the sheep are watering in your avatar. Genius

Andy