Getting my confidence back

by BoLt on 2017-02-06, 06:45

Sorry about the music I fitted the madness of the video.

This is a video of getting my confidence back flying one of my Quads (Quad 1) after it would just would fall out of the sky crashing when doing stunts for no reason. I found this was down to bad soldering of parts by manufacturers. My Quad was loosing power during a stunt, I found this was due to the power connector pre-soldered by a manufacturer with very dry joints. The Quad was loosing power and just dropping out of the sky.

Music by- Excision Shambhala

-These is my Quad Number 1 Specs:-
Impulse RC Alien 5"/RR5
EMAX RS2205 2300KV RACESPEC COOLING SERIES
DalProp T5040 V2
KISS FC (http://flyduino.net/KISS-FC-32bit-Fli...)
KISS 24A ( D shot ) (http://flyduino.net/KISS-ESC-2-5S-24A...)
TBS Unify Pro HV (http://www.immersionrc.com/fpv-produc...)
TBS Triumph Antennas (http://www.team-blacksheep.com/produc...)
Receiver -X4r-SB
Foxeer Arrow V2 2.8mm
Turnigy 1300mah Graphene 4s
GoPro Session 5
Stick on Lens protector

-These is my Quad Number 2 Specs:-
Midge 210 4mm FrameEMAX RS2205 2300KV RACESPEC COOLING SERIES
DYS SE2205 Pro 2300KV Racing Edition 3-5S Brushless Motor
DalProp T5040 V2
KISS FC (http://flyduino.net/KISS-FC-32bit-Fli...)
KISS 24A ( D shot ) (http://flyduino.net/KISS-ESC-2-5S-24A...)
TBS Unify Pro HV (http://www.immersionrc.com/fpv-produc...)
Raptor Antenna 5.8Ghz OmniReceiver -X4r-SB
Foxeer Arrow V2 2.8mm
Turnigy 1300mah Graphene 4s
GoPro Session 5
Stick on Lens protector

-Radio-
Taranis Plus Radio
(5dbi Mod)
Aurora 9 gimbal 2 Axis Joystick GIM-01

-Goggles-
FatShark Dominator V3 Headset
VRx- Laforge V2
Raptor Antenna 5.8Ghz Omni
IRC 8dbi patch