Log in
Similar topics
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ .
Farmer …
Farmer …
Comments: 1
On board aeros vids
4 posters
Page 1 of 1
On board aeros vids
Had a awsome night again tonight with Rich and Andy and got some great on board film of my F450 doing aeros in the day light and after dark, uploading to the tube now
Bit to much light glare on the dark vid from my lights so will need to tape some up but overall very pleased, also got Andys F330 maiden in the dark (because he's useless) on film so that was a added bonus
Stay tuned for the vids
Bit to much light glare on the dark vid from my lights so will need to tape some up but overall very pleased, also got Andys F330 maiden in the dark (because he's useless) on film so that was a added bonus
Stay tuned for the vids
Last edited by Mark Barnes on 2013-08-22, 15:37; edited 1 time in total
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: On board aeros vids
After dark
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: On board aeros vids
Fantastic, its a lot smoother in the flips than I was expecting!
Andy
Andy
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: On board aeros vids
Thats all down to the pilotAndy Sayle wrote:Fantastic, its a lot smoother in the flips than I was expecting!
Andy
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: On board aeros vids
And nothing to do with the Naza
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: On board aeros vids
LOL it should at least inspire Pete knowing that I can successfully fly one of these despite me not knowing how the software works or for that matter my Graupner Radio.
M
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: On board aeros vids
I'm sure some of my ramblings about the software, and gains and stuff has sunk in really, you're just pretending.
Although, on second thoughts.....
Although, on second thoughts.....
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: On board aeros vids
you second though is right! Im a bit like Ray when you start talking about the set up lol
Nah its dead simple Pete honest
M
Nah its dead simple Pete honest
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: On board aeros vids
I've now bought one so il find out soon! LolMark Barnes wrote:you second though is right! Im a bit like Ray when you start talking about the set up lol
Nah its dead simple Pete honest
M
Peter Squire- Committee Member
- Posts : 373
RDMFC Bonus points : 413
Join date : 2010-07-26
Location : Greenfield, North Wales
Re: On board aeros vids
good man, Andy I feel another field build comming on!
You there tonight Pete? you can have a play with mine (quad you load of dirty buggers)
M
You there tonight Pete? you can have a play with mine (quad you load of dirty buggers)
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: On board aeros vids
Good stuff Peter Just shout if you need a hand/advice setting it up. Some tips for the build:
- Don't uses gallons of threadlock. A tiny simdge, especially on the top plate screws, is all that is needed.
- Install the flight controller as close to the centre of the frame as you can, and make sure it is pointing the right way!
- Install the LED unit on the underside if possible. Most of your flying will be up high, so being able to see it in flight is very useful indeed.
- Make sure the overall centre of gravity is slap bang on the centre of the airframe. It doesn't fly nice if it isn't
Field build is essential too, you know you want to!
Andy
- Don't uses gallons of threadlock. A tiny simdge, especially on the top plate screws, is all that is needed.
- Install the flight controller as close to the centre of the frame as you can, and make sure it is pointing the right way!
- Install the LED unit on the underside if possible. Most of your flying will be up high, so being able to see it in flight is very useful indeed.
- Make sure the overall centre of gravity is slap bang on the centre of the airframe. It doesn't fly nice if it isn't
Field build is essential too, you know you want to!
Andy
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: On board aeros vids
Interesting, high speed low passes were awsome, lot's of strange farting noises though!
melfyn- Committee Member
- Posts : 747
RDMFC Bonus points : 885
Join date : 2008-11-17
Location : Denbigh
Re: On board aeros vids
Those strange noises are the sound of a motor shaft retention circlip straining
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: On board aeros vids
the noise when the motor shaft retention circlip stopped straining was even better
M
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: On board aeros vids
What about the noise when it hit the ground then?
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: On board aeros vids
that was pretty good too
M
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
2024-07-30, 08:27 by Daniel Gillespie
» Need help on how to just directly power my Detrum RXC6 6CH 2.4Ghz Receiver?
2024-07-17, 09:55 by Daniel Gillespie
» 2019 Llanfair TH Village Fete
2019-07-12, 18:53 by Rich
» Police crash
2019-04-14, 15:36 by Roy
» Bit of indoors
2019-04-13, 16:49 by Roy