Log in
Similar topics
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ .
Farmer …
Farmer …
Comments: 1
Graupner Elecktro Trainer
+2
Rich
Mark Barnes
6 posters
Page 1 of 1
Graupner Elecktro Trainer
Thought I would share the progress on my new toy.
I was after somthing for Brandon to start with so when the chance came up to get a Graupner Elecktro Trainer I jumped at it. Picked it up last night and was greated with the normal bright and colourfull Graupner box
I then got quite exited at the thought of floats, and to my suprise they are included in the kit
Open the lid and your greated by a nice bright sticker set and a very well packaged kit with a very low part count
Also included is one of the new Graupner Compact 345 Brushless motors and a 35A ESC
and finaly for now a quick test assembley
I was after somthing for Brandon to start with so when the chance came up to get a Graupner Elecktro Trainer I jumped at it. Picked it up last night and was greated with the normal bright and colourfull Graupner box
I then got quite exited at the thought of floats, and to my suprise they are included in the kit
Open the lid and your greated by a nice bright sticker set and a very well packaged kit with a very low part count
Also included is one of the new Graupner Compact 345 Brushless motors and a 35A ESC
and finaly for now a quick test assembley
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Graupner Elecktro Trainer
Don't leave it out in the garden!!!!!
Mike S- RDMFC Member
- Posts : 362
RDMFC Bonus points : 466
Join date : 2008-11-21
Location : Rhuddlan, North Wales
Re: Graupner Elecktro Trainer
Test flight 1 didnt go well!
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Graupner Elecktro Trainer
Ooops! Was a bit windy today
Did the floats come with it?
Did the floats come with it?
Allan Patrick- Committee Member
- Posts : 1620
RDMFC Bonus points : 1842
Join date : 2009-07-19
Location : Colwyn Bay
Re: Graupner Elecktro Trainer
Yep floats come in the kit.
Was abit windy but that didnt make the motor come out lol, more glue required. no other damage
M
Was abit windy but that didnt make the motor come out lol, more glue required. no other damage
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Graupner Elecktro Trainer
You have an issue with motors and engines dont you!
Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
Re: Graupner Elecktro Trainer
This time it was more to do with my assembly mate.
Andy, this model has a tow release and floats. Im sure you can see what Im thinking
Andy, this model has a tow release and floats. Im sure you can see what Im thinking
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Graupner Elecktro Trainer
Mark Barnes wrote:This time it was more to do with my assembly mate.
Andy, this model has a tow release and floats. Im sure you can see what Im thinking
your gona Tug a Tug ???
Guest- Guest
Re: Graupner Elecktro Trainer
No - he's planning on towing a boat!
Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
Re: Graupner Elecktro Trainer
LOL I was thinking more about off water aerotowing with a AS wing.
Anyway, test flight proper done today and it gose pretty well. Bags of power on tap, loops rolls stall turns and flat'ish spin
What more could you want
M
Anyway, test flight proper done today and it gose pretty well. Bags of power on tap, loops rolls stall turns and flat'ish spin
What more could you want
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Graupner Elecktro Trainer
For it to last longer than around a week or two.
Barnesyboy new model protocol:
1) Crashed within 2 weeks
OR
2) Bored and sold on within 3
Barnesyboy new model protocol:
1) Crashed within 2 weeks
OR
2) Bored and sold on within 3
Tim- Committee Member
- Posts : 2968
RDMFC Bonus points : 3235
Join date : 2008-11-18
Location : Tim Mackey lives in Deganwy
Re: Graupner Elecktro Trainer
Haha now thats funny.
ive already crashed it, although I blame the motor and Dads launch for that one. soooooooooo wanna buy it
M
ive already crashed it, although I blame the motor and Dads launch for that one. soooooooooo wanna buy it
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Tim- Committee Member
- Posts : 2968
RDMFC Bonus points : 3235
Join date : 2008-11-18
Location : Tim Mackey lives in Deganwy
Re: Graupner Elecktro Trainer
Lol! How much for?
Allan Patrick- Committee Member
- Posts : 1620
RDMFC Bonus points : 1842
Join date : 2009-07-19
Location : Colwyn Bay
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
2024-07-30, 08:27 by Daniel Gillespie
» Need help on how to just directly power my Detrum RXC6 6CH 2.4Ghz Receiver?
2024-07-17, 09:55 by Daniel Gillespie
» 2019 Llanfair TH Village Fete
2019-07-12, 18:53 by Rich
» Police crash
2019-04-14, 15:36 by Roy
» Bit of indoors
2019-04-13, 16:49 by Roy