Log in
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ .
Farmer …
Farmer …
Comments: 1
Ar7100
4 posters
Page 1 of 1
Ar7100
Anyone know anything about the spektrum Ar7100?
Looks like its a 7 channel Rx, voltage regulator and a head speed governor all in one! All for 80 quid? Sounds a bit too good to be true!
Anyone got and experience or opinions?
Looks like its a 7 channel Rx, voltage regulator and a head speed governor all in one! All for 80 quid? Sounds a bit too good to be true!
Anyone got and experience or opinions?
Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
Re: Ar7100
Stubz,that receiver is awesome.
I use them on my nitros and it's basically a rev limiter that's built in and works much better than a govenor.
It is designed for running 8 volt servos and has a regulator built in on the throttle,rudder and gear channels.
It usually costs around £140 at most places and the version you want is the 7100R.The R version is the rev limiter,and the non R version is without.
When you plug a lipo into it your cyclic servo's will be ran at 8.4 volts,so you will still need an inline regulator.
On my 600LE I use the Perfect regulators 6.5V version.See here.
http://www.fast-lad.co.uk/store/perfect_regulators_in-line_voltage_%3Cb%3E65v_version%3C/b%3E_prr-65vinl-p-9048.html
That regulator is designed for the 7100R and makes for a very clean uncluttered wiring job.
So Stubz,if it's the R version you've found for £80 please share where you found it.Pretty please.
Danny.
I use them on my nitros and it's basically a rev limiter that's built in and works much better than a govenor.
It is designed for running 8 volt servos and has a regulator built in on the throttle,rudder and gear channels.
It usually costs around £140 at most places and the version you want is the 7100R.The R version is the rev limiter,and the non R version is without.
When you plug a lipo into it your cyclic servo's will be ran at 8.4 volts,so you will still need an inline regulator.
On my 600LE I use the Perfect regulators 6.5V version.See here.
http://www.fast-lad.co.uk/store/perfect_regulators_in-line_voltage_%3Cb%3E65v_version%3C/b%3E_prr-65vinl-p-9048.html
That regulator is designed for the 7100R and makes for a very clean uncluttered wiring job.
So Stubz,if it's the R version you've found for £80 please share where you found it.Pretty please.
Danny.
Guest- Guest
Re: Ar7100
Cheers for the Info Danny Boy - Ar7000 for £80, Ar7100R £119 at Probuild - BUT - Just seen the sneaky SOB's are advertising their prices before VAT so with VAT they come in at £96 and £142.80 respectively.
Dont get too excited!
Dont get too excited!
Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
Re: Ar7100
Ahh,well I did get excited for a minute there.
I think Andy found somewhere doing them cheaper than £140 but I can't remember where or how much.
Are you out there Big Perm?
Danny.
I think Andy found somewhere doing them cheaper than £140 but I can't remember where or how much.
Are you out there Big Perm?
Danny.
Guest- Guest
Re: Ar7100
I thought I hadn't spotted him for a while.
The term "Conspicuous by his absence" springs to mind.
Not sure if that's spelt right.
Danny.
The term "Conspicuous by his absence" springs to mind.
Not sure if that's spelt right.
Danny.
Guest- Guest
Re: Ar7100
I belive he is on Holiday
M
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Ar7100
He'd better bring us all a stick or rock or there will be trouble!
Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
Re: Ar7100
Stubbsy wrote:He'd better bring us all a stick or rock or there will be trouble!
Lol or a bunch of bananas.
Danny.
Guest- Guest
Re: Ar7100
Morning Morning. Been on my holeebops
I've got a 7100r in my 700, and it is a mighty fine little thing. I bought mine from Fastlad in the end, not quite the cheapest out there, but only a couple of quid more than the cheapest price I could find (which was from some internet only shop I had never heard of, nor did they give any address details in their contact infom, so I steered well clear)......
I've got one stick of rock for you lot to share too. Although I am tempted to have a nibble now....
Andy
I've got a 7100r in my 700, and it is a mighty fine little thing. I bought mine from Fastlad in the end, not quite the cheapest out there, but only a couple of quid more than the cheapest price I could find (which was from some internet only shop I had never heard of, nor did they give any address details in their contact infom, so I steered well clear)......
I've got one stick of rock for you lot to share too. Although I am tempted to have a nibble now....
Andy
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
2024-07-30, 08:27 by Daniel Gillespie
» Need help on how to just directly power my Detrum RXC6 6CH 2.4Ghz Receiver?
2024-07-17, 09:55 by Daniel Gillespie
» 2019 Llanfair TH Village Fete
2019-07-12, 18:53 by Rich
» Police crash
2019-04-14, 15:36 by Roy
» Bit of indoors
2019-04-13, 16:49 by Roy