Log in
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ
.
Farmer …

Farmer …
Comments: 1
Anyone handy at...
Page 1 of 1
Anyone handy at...
Welding stainless steel?
I've designed a new launchpad for some of this years little (and not so little!) Rockets, and to save it from corrosion, exhaust goop build up and general paint chips and stuff, It would be nice to get it made from Stainless steel. It is mostly square/round tube, with a fairly thin wall thickness (about 1-2.5 mm or so).
Cheers
Andy
I've designed a new launchpad for some of this years little (and not so little!) Rockets, and to save it from corrosion, exhaust goop build up and general paint chips and stuff, It would be nice to get it made from Stainless steel. It is mostly square/round tube, with a fairly thin wall thickness (about 1-2.5 mm or so).
Cheers
Andy
_________________
Chicks dig slop free linkages....
Andy Sayle- Club Chairman
- Posts : 4739
RDMFC Bonus points : -487569787
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Anyone handy at...
This is where I get mine done http://www.dayton-engineering.co.uk/stainless.htm
Allan Patrick- Committee Member
- Posts : 1620
RDMFC Bonus points : 1842
Join date : 2009-07-19
Location : Colwyn Bay
Re: Anyone handy at...
I can do stainless tig
_________________
The best pilots are the ones that practice most!
http://www.futaba-rc.com/systems/18mz.html
Re: Anyone handy at...
Cheers Allan, I didn't know about those guys, but I'll make a note of them for future reference.
Rich, do you fancy doing a bit of welding for me then? Beer tokens or CAD work is the payment
I've got to order some material, cut it to size etc first, so it will be a little while yet...
Cheers
Andy
Rich, do you fancy doing a bit of welding for me then? Beer tokens or CAD work is the payment

Cheers
Andy
_________________
Chicks dig slop free linkages....
Andy Sayle- Club Chairman
- Posts : 4739
RDMFC Bonus points : -487569787
Join date : 2008-11-16
Location : Abergele, North Wales
Re: Anyone handy at...
I haven't got the time really
_________________
The best pilots are the ones that practice most!
http://www.futaba-rc.com/systems/18mz.html
Re: Anyone handy at...
Andy, fyi, they will supply material and cut to size as well. Generally from stock if its reasonably run of the mill
Allan Patrick- Committee Member
- Posts : 1620
RDMFC Bonus points : 1842
Join date : 2009-07-19
Location : Colwyn Bay
Re: Anyone handy at...
Used to be a welding course taught at school here but dont think its run anymore. Can have a chat with the DT fella's if you like to see if we still have the kit and if they would be willing to do me a favour?
Stubbsy- Posts : 1111
RDMFC Bonus points : 1373
Join date : 2010-08-05
Location : Stubbsy lives in Prestatyn
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
» Proposals for Model aircraft flying ( CAA registration) April 2019
» Police crash
» Bit of indoors
» For Sale