What's new in your hanger

What's new in your hanger, starting to get bored with the winter, anyone got anything new or fancy to show off yet ?

I got frost on the inside Yale lock on the front door does that qualify It's colder than a witches watsit here

not yet but may go and pick the SUK up this weekend (but on the downside my car shit its self this morning )

M

(que the Rover Jokes)

in what way, I thought they were s**t brand new were MG's especially the rover type

got to work half hour latter one of the lads said theres oil pissing out of it, which there was. Couldnt see were it was comming from as the belts had trown it everywere. so its at Craven motors now

M

Oil is over-rated anyway.

I'm sure a pair of incontinence pants will sort it out though...

Andy

its a rover there built into the seats

What, you mean like those mattress protector things you can get?

I was thinking anyway, the oil leak is most likely the car protesting at the lack of a tartan rug on the parcel shelf.....

Andy Sayle wrote:What, you mean like those mattress protector things you can get?

I was thinking anyway, the oil leak is most likely the car protesting at the lack of a tartan rug on the parcel shelf.....

don't forget the pipe and slippers

I also heard that an unknown somebody got Barnesy a flat cap for christmas too. I've been unable to confirm that rumour though....

Hehehe
The only new stuff I have is my vapor (Looks very used now!), Dx7 and my CP3

some of us are very sensitive about age I think it would be gracious of you to refain from commenting about Rovers with travel rugs on the back seat and Flat Caps. The next 20/30 years will go very quick for some of you.We do have feelings

Dragging this thread back on topic.
I have 5 models in the queuefor the bench, so decided in view of the weather to make a start on them.
E-Scale P47 Thunderbolt ( more on this later )
Replacement Ripmax Alienator for mine that died a few years back ( Thanks PCM radio )
46" Wildthing MkIII...as mine is very close to retirement and the bonfire
Seagull EP Extra 300
Fly-Fly EDF Hawk - say no more

Got the P40 "Jug" just before Xmas as a gift, ( brand new on the market right now from J Perkins )and its really rather good for an ARTF. For once, this does actually mean ARTF and even I ( notoriously slow builder ) could do the lot in one evening - thats because it comes complete with ready fitted servos X 5, mechanical retracts, sterring tailwheel ( in the right scale position too ) 1150Kv motor, 25A ESC with BEC, - all pushrods ,control surfaces, horns, hinges, etc are already fitted, decals are on etc etc. Even a decent 1600 mahr 3s Lipo battery is supplied complete with matching deans connector. All thats needed is to glue the tail feathers on, and fit a receiver.
One thing which looks very nice is the scale 4 blade 11" prop.
Overall its pretty well finished for a foamy, with very few moulding dimples.
Span 41" weight 2lb 1oz. Only thing missing is a pilot for the office - Ebay to the rescue.

OK I give up....how the hell do you insert a picture without the result being chopped in half?

Tim wrote:OK I give up....how the hell do you insert a picturewithout the result being chopped in half?

To do that, when you uploaded to photobucket, go to bulk uploader, select a lower resolution for smaller monitors. That usually does the trick.

Regards

Zaidy

I will try again then...
Let me know how it appears to you

Half of it is missing to me.

Right click on it and select view image

That works Bri -- wonder how many peeps know that one ?

Whihc half is missing Tim, the top/Bottom half, or a side half? If it is a side half, it may be down to your monitor resolution/size, as teh forum pages resize (in width) to suit the monitor they display on.

It is showing in full here, but that is with a 1920x1080 23" monitor...

Cheers
Andy

Bragging about having a big one again Andy..!! I can only se the starboard side, most of the fuz tail the front whirly bit is missing and part of the port wing

its down to the size of file uploaded to photobucket, as Ziad says use the bulk uploader and at the bottom left(i think) it gives you the option of size, i normaly got for 640 for forums

M

Paul you have to right click and the click on view image from the list that appears