Log in
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ .
Farmer …
Farmer …
Comments: 1
Century Hawk Pro for sale and lots and lots of spares
RDMFC :: Classifieds
Page 1 of 1
Century Hawk Pro for sale and lots and lots of spares
Century Hawk Pro (torque tube drive and metal frame) helicopter set up and in full working order.
Ideal for beginner to intermediate
Specifications
Engine: OS 32
Gyro: JR 490 T H/H JR tail servo 8700G
3 x Spectrum DS821
1x Futaba S9202 on throttle
Wooden blades NOT carbon like in the photo. Used 550mm
7 Channel Spectrum receiver
Battery indicator and heavy duty switch
4.8 volt battery 4600mAh
£300
Also I have lots and lots of spares too many to list, please see photos
Air frame ONLY for a century Hawk sport, requiring (new boom, rear dive housing and a feathering spindle) and TLC
Half an air frame Only for a century HAWK sport which can be made up to a complete one if you have the time.
Metal frame sides for Century Hawk pro
One Toki 40 Engine, with new bearings that needs tuning and setting up correctly.
Wooden blades. 550mm used once
SAB Carbon fibre blades used with slight damage to one !
The lot for £380
Ideal for beginner to intermediate
Specifications
Engine: OS 32
Gyro: JR 490 T H/H JR tail servo 8700G
3 x Spectrum DS821
1x Futaba S9202 on throttle
Wooden blades NOT carbon like in the photo. Used 550mm
7 Channel Spectrum receiver
Battery indicator and heavy duty switch
4.8 volt battery 4600mAh
£300
Also I have lots and lots of spares too many to list, please see photos
Air frame ONLY for a century Hawk sport, requiring (new boom, rear dive housing and a feathering spindle) and TLC
Half an air frame Only for a century HAWK sport which can be made up to a complete one if you have the time.
Metal frame sides for Century Hawk pro
One Toki 40 Engine, with new bearings that needs tuning and setting up correctly.
Wooden blades. 550mm used once
SAB Carbon fibre blades used with slight damage to one !
The lot for £380
RDMFC :: Classifieds
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
2019-07-12, 18:53 by Rich
» Police crash
2019-04-14, 15:36 by Roy
» Bit of indoors
2019-04-13, 16:49 by Roy
» For Sale
2019-03-03, 23:44 by Charles E Cornes
» selling up finaly!
2019-02-10, 16:31 by melfyn