Wanted - Brushed ESC?

Morning all,

I don't suppose anyone has an Brushed ESC lying around gathering dust, from back in the day when Speed 600's and nicads were all the rage have they? It needs to be rated at about 25 amps or more, and must have a BEC onboard too (i.e. not an "opto" type one).

I have a few beer tokens waiting for a good 'un

Cheers
Andy

I would check with Arthur Negus

Andy got one connected to a speed 600, yours for free

I've got one that's been sprayed Andy but not one that's brushed sorry

Reto is so bang on trend!

John, that is very kind of you, I'll take you up on that offer thanks

Andy

Andy, just had a look.Its a Kontronik Sun 1000 with BEC but only 18 amp.
I will put in car 4 u

In case thats too small, then HK are doing a decent 30A version with BEC for under $8
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6468

They're all coming out of the woodwork now!

I have several - A new Jeti 30A, a slightly used Jeti 35A, a new Protech 18A and a somewhat dubious looking Sun 30A. All have BEC

Both the Jeti's are for up to 12 NiCd cells and the others 10 cell

You're welcome to the 4-40 btw

Oooh, that;s a point, I need it to be able to cope with a 3s lipo on the input side...

Cheers for the offers guys, looks like I'll be able to select the best one from a Bunch

Andy

Andy dont worry to much about lipo compatable just keep an eye on the timer, the one in my Cherub isnt lipo hence i keep landing to check the levels

Couldnt you install a in-line li-po cut off?
I think I have seen them for the brushed SC class cars while using 2s li-po

The issue may be more about maximum permissible input voltage rather than LVC

True Tim, and as an electric head i souldnt recomend doing it that way

Nah, I agree about the whole LVC lipo cutoff thing actually - I never rely on them, and always use a timer to land way before the cut off point.

Hi andy

Guess your sorted by now but if not I have a ripmax Xtra 30 amp esc with bec as new still in its wrap.

steve