Log in
Similar topics
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ .
Farmer …
Farmer …
Comments: 1
My Glens Cap 30%
4 posters
Page 1 of 1
My Glens Cap 30%
Towards the end of the year i got myself a Glens Cap 232 30% with a G63 up frount. its got a full complement of JR 8411`s and now has a MT smoke Pump Fitted, this is going to be used for IMAC sportsmans next year so hopfully I dont deck it
Mark
Mark
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: My Glens Cap 30%
You lucky devil Mark....MT smoke pump...., have been hankering after a smoke system for a while, just to try something different, tried streamers on the wings but that did`nt hit the spot, it was still lacking something.
Bob G- RDMFC Member
- Posts : 48
RDMFC Bonus points : 32
Join date : 2008-11-18
Re: My Glens Cap 30%
Not sure if you guys are interested, but I have been working on a design for a smoke pump for a while now. They are pretty basic really, just a couple of gears, a housing and a motor/ESC. It started out as a design for waterpump for a Steam turbine *, but it is WAAAYYYYyy too powerful! A bit of redesign should see it suitable for use with oils and diesel with not too much trouble.
The only thing I am not sure of (and perhaps Barnesy can answer this) is the flow rate needed, and at what pressure? How much smoke oil do you get through? How long does that last? If I know the flow rate, I can size the pump appropriately....
Any interest in beta testing some units if I can get them made?
Cheers
Andy
* Steam. It's the future you know!
The only thing I am not sure of (and perhaps Barnesy can answer this) is the flow rate needed, and at what pressure? How much smoke oil do you get through? How long does that last? If I know the flow rate, I can size the pump appropriately....
Any interest in beta testing some units if I can get them made?
Cheers
Andy
* Steam. It's the future you know!
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Re: My Glens Cap 30%
no idea Andy I`ll try and find out for you
M
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: My Glens Cap 30%
Cheers matey...
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
2019-07-12, 18:53 by Rich
» Police crash
2019-04-14, 15:36 by Roy
» Bit of indoors
2019-04-13, 16:49 by Roy
» For Sale
2019-03-03, 23:44 by Charles E Cornes
» selling up finaly!
2019-02-10, 16:31 by melfyn