Log in

I forgot my password

RDMFC Social Media
RDMFC Facebook Page
Latest topics
» For Sale
2019-03-03, 23:44 by Charles E Cornes

» selling up finaly!
2019-02-10, 16:31 by melfyn

» Aldi
2019-01-15, 11:03 by Mark Barnes

» Wild Hare Edge 540
2019-01-11, 19:21 by Mike S

» Happy Christmas
2018-12-24, 20:45 by Gary M Jones

Saturday 7/7/18

2018-07-07, 21:07 by Gary M Jones

I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ Smile .

Farmer …

Comments: 1

Milling machine for sale

Go down

Milling machine for sale

Post by Guest on 2015-02-17, 16:58

Thought this might be of intrest on here.

Due to no longer having space im offering my milling machine for sale.

Its a naerok 350.

Comes with A variety of tooling. Lots of cutters some carbide some hss and some with replaceable tips. Various clamps and a milling vice. A morse 2 sleeve. Drilling chuck to suit.

The bed is approximately 450mm long with 300mm by 200mm of travel on x and y respectively.
The head is turret mounted allowing z height to be adjusted, Then Actual travel on z is about 120mm.

Its a fairly large machine for a home workshop, as such it will cope easily with just about anything modeling related. It weighs roughly 22 stone so will need a sturdy table and a van or trailer to move it.

The slides are nice and smooth with no wear or wobble, just a tiny bit of backlash on the leadscrews.


If anyones intrested drop me a pm.

Cheers lads.


Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum