Log in
Similar topics
Latest topics
Saturday 7/7/18
2018-07-07, 21:07 by Gary M Jones
I was at the field today between 14:00 & 15:00 all on my own , good flying too. There is a dead sheep along the fence line towards the gate from the pits, I saw the farmer so reported this to her. I hope no one had plans for a BBQ .
Farmer …
Farmer …
Comments: 1
Spektrum Trims
4 posters
Page 1 of 1
Spektrum Trims
Someone asked or was talking about these at one of the Saturday indoor bashes, here's the link for the ones made in the States in aluminium, I don't think anyones got round to making them in the UK yet. http://www.eastrc.org/estoretrimtab1.htm Apparently they take around two weeks to arrive
Re: Spektrum Trims
I've dealt with East R/C before but for the life of me I can't remember what I got from them
Re: Spektrum Trims
I've had trim issues on my DX6i Horizon Hobby send out free ones.But a good fix is a small fillet of plastic epoxy resined in does a 100% fix.Also the menu wheel went last tuesday night simple fix .Google it.Also HH sent a free one .
Guest- Guest
Re: Spektrum Trims
I don't know why you lot don't just bite the bullet & buy proper radio systems in the irst place, ie Futaba, can't honestly ever remember having a single problem with any of the models of transmitters I've had. even 27Mhz
Re: Spektrum Trims
Rich wrote:I don't know why you lot don't just bite the bullet & buy proper radio systems in the irst place, ie Futaba, can't honestly ever remember having a single problem with any of the models of transmitters I've had. even 27Mhz
Spektrum must spend more time in the post than they do transmitting
Re: Spektrum Trims
I think it was my first Vess propellers I got from East R/C before anyone was retailing them in the UK, although looking at their website they don't do props at all now
Re: Spektrum Trims
Rich wrote:I don't know why you lot don't just bite the bullet & buy proper radio systems in the irst place, ie Futaba,
This is me taking the moral high ground and not rising to it and what is the irst place? is that where they make um????
M
Mark Barnes- Club Secretary
- Posts : 6607
RDMFC Bonus points : 8240
Join date : 2008-11-16
Location : Rhyl North Wales
Re: Spektrum Trims
Same here Mark,not rising at all.
Rich,have you got your new screen sorted yet.
Danny.
Rich,have you got your new screen sorted yet.
Danny.
Guest- Guest
Re: Spektrum Trims
That was a upgrade to the mark 2 screen not a fault making it more sensitive to the touch, unlike a trim you can use the setup screens without actually touching it, seems Futaba had it all covered. Still not bad for a 6 year old transmitter.
Some Spektum transmitters even come out of the box with a fault, the throttle & elevator controls are the wrong way around.
Spektrum have at last realised they got the modulation wrong & are moving to a spread spektrum system.
I left the "F" out so you could understand it Mark, seemed to of worked a treat.
Some Spektum transmitters even come out of the box with a fault, the throttle & elevator controls are the wrong way around.
Spektrum have at last realised they got the modulation wrong & are moving to a spread spektrum system.
I left the "F" out so you could understand it Mark, seemed to of worked a treat.
Last edited by Rich on 2011-03-08, 20:44; edited 1 time in total
Re: Spektrum Trims
CNC aluminium trims for a DX6i. Proof that you can actually polish a turd....
Andy Sayle- Club Chairman
- Posts : 4738
RDMFC Bonus points : -487569788
Join date : 2008-11-16
Location : Abergele, North Wales
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
2019-07-12, 18:53 by Rich
» Police crash
2019-04-14, 15:36 by Roy
» Bit of indoors
2019-04-13, 16:49 by Roy
» For Sale
2019-03-03, 23:44 by Charles E Cornes
» selling up finaly!
2019-02-10, 16:31 by melfyn